CSM — PE WRAPPING PROJECT INPUT SHEET
Revision: 2026-10-11 | Language: English
One record per finished-bundle and film combination.
Planning input only: not a machine manual, approved layout, safety design or acceptance certificate.

PROJECT / RECORD ID:
Drawing numbers / revision / units:
Status for each value: measured / drawing-based / requested / estimated / unknown.

A. COMPLETE MOVING BUNDLE
Panel type / surface:
Panel quantity / alignment:
Width min / typical / max (mm):
Total height min / typical / max including supports (mm):
Length min / typical / max (mm):
Total moving weight (kg), including supports and protection:
Support / edge-protection drawing reference:
Labelled end view / side view / photo or video IDs:
Requested usable-passage drawing / supplier fit confirmation:
Agreed usable width / height / complete-bundle clearance (mm), drawing revision:
Maximum usable package height: supplier-confirmed / unresolved (attach evidence):

B. FILM & REQUIRED FINISH
Film manufacturer / material / grade / data-sheet reference:
Thickness and units:
Film width (mm):
Core inside diameter / roll outside diameter (mm):
Roll weight (kg):
Stretch / cling characteristics if supplied:
Coverage / overlap / reinforcement requirements:
Film start / finish requirements:
End protection / separate strapping:
Storage and transport conditions:
Required sample-packaging review / sample reference:

C. UPSTREAM & DOWNSTREAM HANDOVERS
Travel direction / floor-plan reference:
Upstream / wrapper / downstream conveyor datum heights (mm):
Roller / gap / support arrangement:
Bundle load distribution; each segment's agreed rating:
Arrival intervals / job mix (measured or requested):
Full-bundle removal method / responsible party:
Required bundle-complete / ready-to-receive / transfer-release interfaces:
Proposed fault response / interface owner:
Project-specific safeguarding / access review responsibility:

D. SCOPE TO CONFIRM — INCLUDED / EXCLUDED / UNRESOLVED
Usable aperture and operating clearance:
Film grade and roll limits:
Automatic clamping / cutting / sealing / roll change:
End coverage / protective packing / separate strapping:
Wrapping settings / finished-bundle output with conditions:
Power and site installation requirements:
Documents / sample review / agreed quotation references:

REFERENCE BOUNDARIES
The documented PE wrapper configuration lists a 1200 x 1200 mm package section,
16000 mm length and 3000 kg effective load. 5–10 m/min is conveyor speed,
not completed-bundle output. Conveying surface height 1200 mm is not package height.
A 1250 mm requested bundle height is 50 mm above the documented package height;
fit remains unconfirmed. Gantry individual-panel ratings are not bundle-transfer ratings.
1200 x 1200 mm is the documented package section, not a verified maximum aperture.
35000 x 2500 x 2600 mm are overall machine dimensions, not package clearance.
A separate maximum usable package height is not confirmed in the source brief.
The proposed 2.5 m gantry stacking height is not the wrapper working height.
Automatic mode does not establish automatic clamping/cutting/sealing or unmanned operation.

Product: https://colorsteelmachine.com/machines/pe-wrapping-machine/
Guide: https://colorsteelmachine.com/resources/pe-wrapping-machine-inputs/
Solution: https://colorsteelmachine.com/solutions/sandwich-panel-stacking-pe-wrapping-line/
Enquiry: https://colorsteelmachine.com/?product=Full-Stack%20PE%20Wrapping%20Machine#inquiry
Do not send passwords or other sensitive operational data in this planning sheet.