CSM S01 SANDWICH PANEL STACKER INPUT SHEET
Version: 7 October 2026
Purpose: S01 single-unit and synchronized dual-unit enquiry preparation.
Selection basis: current S01 product 20261007, reviewed 7 October 2026.
2,500–12,000 mm: single unit, stacking only or turnover plus stacking.
Over 12,000 mm without turnover: single-unit stacking-only project review.
Over 12,000 mm with turnover: synchronized dual-unit project review.
Single-unit stack height: 0–2,500 mm; this does not rate dual-unit stack height.
Length, width, thickness, weight, core and profile combinations need confirmation.
This is NOT an operating programme, installation plan, test procedure or approval.
Leave unknowns as TBD. Use units and actual drawing/sample references.
S04 gantry specifications are separate and must not be copied into this brief.

A. PROJECT AND DOCUMENT IDENTIFICATION
Company / country / contact:
Current production task / requested change:
Product page or proposed configuration reference:
Layout number / revision:
Drawing and attachment list:
Existing line builder / controls-interface owner:

B. ONE RECORD PER PANEL VARIANT (COPY AS NEEDED)
Product / sample ID / drawing number / revision:
Core material / metal-facing description:
Panel length / overall width / effective width:
Panel thickness / rib height / edge or joint features:
Individual weight / measured or estimated / source:
Both-face photos / upper face at line exit:
Coating / protective film / panel-maker handling restrictions:
Incoming travel direction / leading end / receiving height:
Current-process video reference:
Requested supplier contact-method review:
Product combinations still needing confirmation:

C. TURNOVER AND FINISHED-STACK REQUEST
Incoming end-view sketch / face and rib labels:
Finished-stack end view / requested orientation sequence:
Products or orders that change the sequence:
Panel count / layers / requested stack height:
Alignment reference / separators / support arrangement:
First and last panel requirements:
Requirements fixed / alternatives open for discussion:
Who confirms the proposed stacking arrangement:

D. LINE EXIT AND DOWNSTREAM HANDOVER
Cut-off exit / receiving conveyor / retained equipment:
Transfer heights / travel direction / fixed obstructions:
Completed-stack handover position:
Wrapping / strapping / labelling requested or excluded:
Bundle-transfer equipment / responsible supplier:
What happens to arriving panels during stack removal (question):
Measured arrival timing / observation conditions:
Requested output / complete-sequence definition:
Product changes / recipe, adjustment or tooling questions:
Available utilities / details for supplier confirmation:

E. UNRESOLVED SOURCE AND PROJECT QUESTIONS
Current route / model reference / requested motion:
Older 12/13 m presentation references do not approve current single-unit turnover:
Project-specific maximum length and permitted combinations:
Dual units: spacing / support / synchronization / controls / target stack height:
Dual units: requested cycle and complete timing boundary (not a brochure rating):
Requested panel sizes and combinations for review:
Complete project layout requested:
Missing sample / drawing / material information:
Included / optional / excluded scope items:
Responsible contact / next response:

Do not infer an unlisted payload, pickup width, thickness rating or cycle.
No acceptance result or engineering approval is recorded here.
Send authorised attachments: tony.buy@gmail.com
Guide:
https://colorsteelmachine.com/resources/sandwich-panel-stacker-inputs/
Product:
https://colorsteelmachine.com/machines/sandwich-panel-stacker/