Documents by machine · ten families
Find the S02 C/Z stacker, S04 gantry stacker and P01 PE wrapper English PDF brochures and product videos, or choose an editable project input sheet for your machine. PDF brochures describe their named model; TXT sheets collect your project information. No registration required.
S04 · Stacking systems
For polyurethane (PU) sandwich, corrugated wall and cleanroom panels. The brochure covers vacuum pickup, panel turnover, stacking, technical data and configuration inputs.
4–15 m panel length · 50–200 mm thickness · 450 kg maximum total load
Current brochure: October 2026 · Product video: CSM YouTube channel (opens in a new tab).
P01 · Packaging
English product brief for horizontal orbital wrapping of complete composite panel stacks. Includes the supplied configuration, control functions and line-handover inputs.
1,200 x 1,200 mm package section · 16,000 mm length · 3,000 kg effective equipment load. The approximately 2,800 kg requested stack weight is a separate value. Package section, conveyor level and external machine dimensions are different; maximum usable package height requires the agreed passage drawing.
Current brochure: 11 October 2026 · Based on the owner-supplied manufacturer document.
Linked-line solution · S04 + P01
English solution brief covering the proposed inline arrangement, panel turnover and stacking sequence, reported project inputs, equipment responsibilities and open interface checks. It is not an operating manual or validated compatibility approval.
Current solution brief: 09 October 2026. Individual product brochures above remain separate documents.
Choose your machine below. These editable TXT sheets collect actual project values; they are not product brochures, operating manuals or capacity approval. Some machines share a preparation sheet—use only the relevant section. Compare the ten machine families.
Images are reused from the existing machine catalogue. Illustrations and catalogue views identify a preparation route, not a delivered installation or verified performance.
F01 · Project preparation
Record material dimensions, incoming presentation and the receiving line interface.
Available: Feeding inputs (TXT). A model-specific PDF brochure is not listed here.
F02 · Project preparation
Use the continuation inputs to describe material presentation and the receiving line; do not infer a robot selection from this sheet.
Available: Feeding inputs (TXT). A model-specific PDF brochure is not listed here.
F03 · Project preparation
Record the core-board or panel material, incoming arrangement and receiving orientation.
Available: Feeding inputs (TXT). A model-specific PDF brochure is not listed here.
The separate S04 vacuum gantry brochure and video are above. Do not transfer its limits to these machines.
S01 · English product brief
Record panel variants, incoming face, finished-bundle pattern and downstream handover.
Available: 4-page English PDF (20261007 and selection routes), plus the blank panel input sheet. Standard single-unit maximum: 240 kg per panel. Above 240 kg requires customization or modification. Dual-unit limits require separate project review.
S02 · English product brochure
Model MCZ-Z-400-10: maximum lifting weight per individual profile 300 kg. Do not select this model for any individual profile above 300 kg.
Available: three-page English PDF brochure, profile inputs (TXT) and two product operation videos.
S03 · English product brochure
Use the floor deck section to record profile, total and effective width, incoming face, finished face and full-stack handover.
Available: three-page English PDF brochure and profile inputs (TXT). Width definitions, nominal-cycle conditions and lifting limits require project confirmation.
W01 · Project preparation
Record cleat and purlin drawings, fixture references and the required weld scope.
Available: Welding inputs (TXT). A model-specific PDF brochure is not listed here.
W02 · Project preparation
Record tie-rod drawings and whether the project needs integrated cutting and welding or welding only.
Available: Welding inputs (TXT). A model-specific PDF brochure is not listed here.
The S01 sandwich panel stacker, S02 C/Z purlin stacker, S03 floor-deck turnover stacker, S04 gantry flipping and stacking machine and P01 full-stack PE wrapping machine have English PDF brochures. The other five entries currently link to editable TXT project input sheets and preparation guides, not model-specific PDF brochures.
The S02 card links to two C/Z operation videos; the S04 and P01 brochure cards link to their corresponding product videos on YouTube. No product operation video is listed for the other seven entries on this page; a company channel or a similar machine video is not a substitute for confirmed footage.
No. Download a copy, fill it with actual values and units, mark unknowns as TBD, and save it. Use the product page to start a matching enquiry; downloading does not send your information.
Yes. Project downloads has the existing fillable enquiry, existing-line and quotation-comparison PDF forms. These blank preparation forms are separate from model-specific product brochures.